Arlo camera not charging issue

Helpless because your Arlo camera is not charging? We can help you fix it.

Arlo cameras perform decent security functions, but they have a habit of running into one or the other from time to time. Users are unable to charge the camera, and as a result, the camera is no longer usable.

The most probable reason is the poor connection using the adapter cable. if you will not connect the power cable to the port properly, the camera will not be able to recharge and, as a result, stops performing the function. So, always ensure that the power adapter is plugged into the correct port. Don’t forget to make sure that the charging cable is compatible with the camera and that it can carry an adequate power supply enough to charge the Arlo camera.



In this guide, we have put down a list of possible solutions that can help you charge your Arlo camera again. Before you check them out, let’s take a look at the possible reasons why your Arlo camera is not charging. 

Reasons why Arlo Camera Isn’t Charging

Here are the most common reasons why the Arlo camera is not charging:

Incorrect Cable Connections

If the USB cable charging the camera is not connected properly, your Arlo camera will not be able to charge. This is because adequate power will not reach the camera.

Solar Panel Location

If you use a solar panel to charge the Arlo cameras, make sure it is installed in an area that receives enough sunlight to charge the Arlo camera.

Dead battery

If the battery of the Arlo camera is dead, it won’t be able to hold the charge even if the charging setup is in the proper position.

Poor Camera Maintenance

The camera kit includes documentation in which the maintenance procedure is mentioned. Make sure you follow these steps to ensure the Arlo camera is maintained properly.

Now that you know why the Arlo camera is not charging, let’s see how you can fix this issue.

Also Read: Arlo camera blinking orange? Try these fixes

Properly connect the charging cables

Before trying some advanced troubleshooting methods, examine the cable connections and see if the same adapter is of the same power as recommended. The 9V power rating charges the device properly. You can also use any fast charging cables recommended by the company.



Monitor Camera Usage

You should also monitor your camera and see its activities to figure out why it is not charging properly as it should. Make sure your Arlo camera faces the correct direction where it has to record the footage so that it does not have to move to capture the surroundings. Similarly, if the camera sensor is enabled or if it is turned on continuously, the battery will drain very fast than usual.

If you continuously charge your Arlo camera, the charging socket will be damaged. Moreover, the power to hold the charge is also declined.
To prevent the camera from draining fast, you can turn on the camera only at peak points. Your Arlo camera is capable of recording only shorter videos you can tweak your camera to do so. These steps can prevent you from recharging the camera often.

Relocate your Panel for Sun Exposure

Your Arlo camera panel needs proper sunlight throughout the day to be able to recharge the camera properly.
If the camera is at a place that does not receive proper sunlight or its elevation does not receive sunlight, your Arlo camera will not fully charge.

  • Remove the charging panel from the location it is placed right now.
  • Now locate a position that receives proper sunlight without any obstructions.
  • Also, you need to ensure that the location is near the Arlo camera so that there is no transmission delay and charging issue.
  • Also, elevate the charging panel so that it can receive the sun throughout the day.
  • After installing the camera panel, connect back all the charging cables so that the camera starts to charge.

If you are not familiar with the technical know-how, you can seek help for installation. You can contact Arlo Customer Service Number +1 (844) 523 4438

Ensure camera maintenance 

Proper maintenance of the Arlo camera will ensure its longer life and will also elongate the charging life. If not properly taken care of, you will keep facing the camera not charging problem now and then. Follow the steps below to make sure that the Arlo camera remains in a good state:

  • Only use the charging cables recommended by the manufacturer.
  • Ensure that the camera temperature remains below 32 degrees.
  • Always fully charge the Arlo camera before you connect it to the camera panel.
  • Insert new batteries in the camera as soon as the previous ones are unable to hold the charge. This is necessary to prevent damaging the charging port.
  • Moreover, place the Arlo camera in a position where it does not have to bear the direct impact of extreme weather conditions.

Contact Customer Support

If your Arlo camera is not charging charge despite trying all the fixes mentioned above, it's better to contact Arlo Customer Support. The support team will be able to provide the expert level and make your camera hold charge again. You can contact a technician who will be able to assist you in resolving this problematic issue. Dialing Arlo technical support phone number guarantees that your problem will be taken care of.

Conclusion

That’s all in this troubleshooting guide. Hope you were able to figure out why your camera is not charging and could successfully resolve the issue. If the issue persists, contact the Arlo Support Number to fix it. Dial the toll-free Arlo Tech Support Number +1 (844) 523 4438 for help.


Comments

Post a Comment

Popular posts from this blog

Is Arlo Camera not syncing with the base station? Try these solutions

Image
If you cannot make your Arlo camera sync with the base station even after trying your best, you are at the right place. In this guide, we have put together the reasons why your Arlo camera is not syncing with the base station and what can you do to resolve the issue. Most often than not, a dead battery is a reason why the Arlo camera is not syncing. Similarly, if the camera is installed far from the base station, you can have sync-related problems. Let’s look at all the reasons that can create a problem with the camera and base station syncing. After we identify all the possibilities behind the problem, we will move on to the fixes. Reasons why Arlo Camera is not syncing with the base station Here are all the possible causes that can create hurdles in the sync between the Arlo camera and the base station: First Things First To sync the Arlo camera with the base station, you must press the sync button present on the Arlo camera after connecting the camera to the base station. Not in Ran
Read more

Arlo Camera not Live Streaming - call number +1 (844) 523 4438 for help

Image
In this guide, we have mentioned the tried and tested methods capable of resolving the Arlo Camera not Streaming live content issue.  Arlo live streaming is an excessive feature that is used with most Arlo camera devices by users. Yet, certain users in cyberspace have been troubled in opening the feature. You can view streams from your Arlo cameras for up to 30 minutes. The Arlo app will stop streaming if you watch the stream for more than 30 minutes. In order to resume the stream, press the play button. A 30-minute streaming limit has been executed to evade possible problems if a stream is unintentionally left active. The common issues can occur with uncapped or unlimited streams that are left active by chance. Continuously streaming HD content can strain network bandwidth and cause data overruns. Many Arlo cameras are wireless and constant streaming drains the battery much faster on wireless devices Though there are various reasons for the issue, most are honestly easy to fix. Simila
Read more

Arlo camera not detecting the motion

Image
In this article, we have addressed the Arlo Camera not detecting motion issue and have mentioned several fixes that can help resolve the issue. Is your Arlo security camera not detecting motion, and you are unable to troubleshoot the problem? In this guide, we have put together all the possible reasons that are creating issues in motion detection and the best solutions that can help resolve the problem. Before we head out to troubleshoot the problem, it is important to find out the reason why the Arlo camera is facing issues while detecting motion. This will help you understand if you’ve set up everything correctly and troubleshoot the issue in no time. Reasons why your Arlo Pro Camera is Not Detecting Motion For the uninitiated, Motion Detection is a feature that automatically alerts you on your email when your security camera detects any live movement. To use this important feature of your Arlo camera, you need to fulfill a few conditions that the motion detection feature depends on.
Read more